| Marca | Integra Metering AG (formerly Aquametro) |
| Producto | 92005 |
| Descripción | caudalímetro |
| Código interno | PMX4021887 |
Por favor, póngase en contacto con nosotros para realizar un pedido para ofrecer el mejor precio y tiempo de entrega posible para Integra Metering AG (formerly Aquametro) /92005 número, también puedes pedir algún otro número de modelo. Podemos ofrecer el mejor precio y tiempo de entrega, con una amplia red de distribución de productos en Mexico mercado de productos industriales.
VENDEMOS SOLO PRODUCTOS NUEVOS Y ORIGINALES.
Nuestra empresa no es un distribuidor autorizado. Todos los derechos están reservados por los fabricantes y sus socios oficiales.
VZO 15 ... 40 con rosca, PN 16
Fuel-oil fuel meter
medidor de aceite
M-Bus pulse collector
PMG 32-RH1 6.0_260_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0,075 m³ / h Continuous flow qp: 6 m³ / h Maximum flow qs: 12 m³ / h Kvs-value: 12.7 m³ / h Pressure loss at qp: 0,22 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004
94252 PMGF 32-RH1 5.0_150_1 1/4"
Size: DN 32 with thread 1 1/2 "(for screw 1 1/4") Nominal pressure: PN 16 bar length: 150 mm Mounting position: vertical falling temperature max .: 130 ° C Maximum flow qs: 6.3 m3 / h Nominal flow qp: 5 m3 / h minimum flow qi: 0.1 m3 / h pulse value: 1 l Smallest readable amount: 0.1 l registrable: 99,999 m3 measuring principle: multi-jet impeller, dry running With CE marking
PMGS 32-RH1 5.0_150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical ascending Riser counter Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0.1 m³ / h Continuous flow qp: 5 m³ / h Maximum flow qs: 6,3 m³ / h Kvs-value: 13.6 m³ / h Pressure loss at qp: 0,14 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004
counter
PMW-basic 32 10._260_1 G1 / 4; Multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 12.7 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001
PMWF-basic 32 10._150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 10.3 m³ / h Pressure loss in Q3: 900 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001
PMW-basic 16._300_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Thread connection: G 1 " Nominal size: DN 40 Mounting length: 300 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.16 m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 25.6 m³ / h Pressure loss in Q3: 400 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
PMWS-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical ascending Riser counter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 20.8 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
PMWF-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 22.2 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
CE test water meter R49 DN15-32
CE test water meter R49 DN40-50
ART.NO. 80113/2008 AQUAPULS 1L
Electronic reading system IP68
Last crop per meter
ART.NO. 92042 VZO 15 RC 130/16-RV0,1
Medidor de aceite combustible
ART.NO. 92048 VZO 20 RC 130/16-RV1
CONTOIL® oil meter VZO 15 RC 130/16-RV 0.1 Ring piston meter for mineral oil, with rotatable roller counter
P / N 92280 metro del aceite AQUAMETRO
G/E F.O SUPPLY FLOW METER
mechanical counter tmax:60C DN 4mm Qmax 80 l/h Qn 50 l/h PN25bar Qmin 1 l/h 1,25ml/mp
counter VZO-4 combustible
MOTOR AC230V 50 / 60Hz DN25 con el condensador y el engranaje para ACTUADOR TIPO: 2KN:
contador de combustible engranaje
contador de combustible engranaje
flowmeter 10L/h - 600L/h 16BAR Tmax:130C
counter flange
medidor de combustible
94606 PMWF-basic 32 10._150_1 1/4"
TOPAS metros agua caliente, Tamaño nominal: DN 32, con rosca 1 1/2 "(para tornillo 1 1/4"), la presión nominal: PN 16 bar, Longitud total: 150 mm, Posición de montaje: caída vertical, Temperatura máx. : 90 ° C, sobrecarga flujo Q4: 12,5 m3 / h, Permanente caudal Q3: 10 m3 / h, Transición flujo Q2: 12:16 m3 / h, mínimo caudal Q1: 0,1 m3 / h, rango de medida: R 100 , la más pequeña cantidad legible: 0,1 l, registrable: 100.000 m3, principio de medición: turbina multi-jet, el funcionamiento en seco
